The Linksys Extender Setup is a tiny device that enhances the router’s range and signals significantly. Basically, it helps to cover the WiFi dead zones in the home or office and keeps the devices connected. The installation process of the extender might be difficult if the user performs it for the first time. But we are here with our simplest setup points to make it clear to you.
Step 1-Place The Extender Near To Your Existing Home Router
- First of all, place the extender close to the router during the setup process. It is the ideal location to get a better router range.
- Keep the extender away from other electronic devices to prevent interruptions in the signal.
- Also, don’t let the extender come in the range of metal items. It can cause obstructions in the signal range.
Note: After completion of the configuration process, you can relocate your extender to your desired location. But keep in mind to place it within the range limit of the router.
Step 2-Fix The Extender And Connect Your Device To The Wireless Network
To begin with, plug the extender into an electric power socket for the further process. Following this, your extender must be ready to set up by indicating the ideal light. Later, use your device and open the WiFi network list on it.
From the networks list, select the right one and enter the password there. In this way, you can connect your device to the WiFi network in order to configure the extender. Besides that, you can make the connection by using an ethernet wire if you are using a laptop or PC. Make sure that the ethernet wire is new or well-functioning.
Step 3-Visit The Linksys Extender Login Page On Connected Device
To log in to the setup page, use any web browser on your connected device. Launch the browser on your mobile or PC. Then, in the search bar, type the extender’s default web address and click enter. Here, the extender’s web address is extender.linksys.com.
Apart from that, you can also use the extender’s IP address instead of the web address. Where the IP address of the extender is 192.168.1.1. After inserting and clicking anyone from both, the web browser will automatically redirect you to the Linksys extender login page.
Step 4-Insert The Login Credentials To Configure Your Extender
As you visit the extender log-in page, there you will see the login credentials field which contains the username and password box. Enter the login details in the field and tap the Login option. Use admin as the username and password in the required box. Thus, you will be successful in the login process.
After logging in to the extender page, start the setup procedure. On the next page, there will be an option to choose your type of connection. Select your connection type and click the Start Setup option. Wait for a few minutes and let the extender complete the configuration. After some time, the setup process will be completed and the extender will be ready to use.
Step 5-Go To The Extender Advanced Settings And Make The Changes There
After completing the installation, create a strong password for the extender to make the network safe and secure. To do this, visit the extender’s default web-based setup page and then go to the wireless advanced settings. There you can do the modifications in the other options also.
However, to apply and implement the changes, don’t forget to click the Save option. If you don’t do this, the modifications will not be saved. Additionally, there will be a cancel option also. To discard and leave the changes, you can use that option.
By having the Linksys extender in place, you will get a better internet signal and speed at every corner of your home or office. By using these simple steps, you will be able to do the extender setup without any hurdles. After that, verify the connection of the extender and its working as well. In case, you are not still able to configure the extender, feel free to reach us to get the solutions.